Comparing coronary artery cross-sectional area among asymptomatic South Asian, White, and Black participants: the MASALA and CARDIA studies.

BACKGROUND: South Asian individuals have high risk of atherosclerotic cardiovascular disease (ASCVD). Some investigators suggest smaller coronary artery size may be partially responsible. METHODS: We compared the left anterior descending (LAD) artery cross-sectional area (CSA) (lumen and arterial wall) among South Asians in the Mediators of Atherosclerosis in South Asians Living in America (MASALA) study with White and Black participants in the Coronary Artery Risk Development in Young Adults (CARDIA) study, adjusting for BMI, height, and other ASCVD risk factors. We used thin-slice non-contrast cardiac computed tomography to measure LAD CSA. We used linear regression models to determine whether race/ethnicity was associated with LAD CSA after adjusting for demographic factors, BMI, height, coronary artery calcium (CAC), and traditional cardiovascular risk factors. RESULTS: Our sample included 3,353 participants: 513 self-identified as South Asian (44.4% women), 1286 as Black (59.6% women), and 1554 as White (53.5% women). After adjusting for age, BMI, height, there was no difference in LAD CSA between South Asian men and women compared to White men and women, respectively. After full adjustment for CVD risk factors, LAD CSA values were: South Asian women (19.9 mm2, 95% CI [18.8 - 20.9]) and men (22.3 mm2, 95% CI [21.4 - 23.2]; White women (20.0 mm2, 95% CI [19.4-20.5]) and men (23.6 mm2, 95% CI [23.0-24.2]); and Black women (21.6 mm2, 95% CI [21.0 - 22.2]) and men (26.0 mm2, 95% CI [25.3 - 26.7]). Height, BMI, hypertension, CAC, and age were positively associated with LAD CSA; current and former cigarette use were inversely associated. CONCLUSIONS: South Asian men and women have similar LAD CSA to White men and women, and smaller LAD CSA compared to Black men and women, respectively, after accounting for differences in body size. Future studies should determine whether LAD CSA is associated with future ASCVD events.

A novel planar ion funnel design for miniature ion optics.

The novel planar ion funnel (PIF) design presented in this article emphasizes simple fabrication, assembly, and operation, making it amenable to extreme miniaturization. Simulations performed in SIMION 8.0 indicate that ion focusing can be achieved by using a gradient of electrostatic potentials on concentric metal rings in a plane. A prototype was fabricated on a 35 × 35 mm custom-designed printed circuit board (PCB) with a center hole for ions to pass through and a series of concentric circular metal rings of increasing diameter on the front side of the PCB. Metal vias on the PCB electrically connected each metal ring to a resistive potential divider that was soldered on the back of the PCB. The PIF was tested at 5.5 × 10(-6) Torr in a vacuum test setup that was equipped with a broad-beam ion source on the front and a micro channel plate (MCP) ion detector on the back of the PIF. The ion current recorded on the MCP anode during testing indicated a 23× increase in the ion transmission through the PIF when electric potentials were applied to the rings. These preliminary results demonstrate the functionality of a 2D ion funnel design with a much smaller footprint and simpler driving electronics than conventional 3D ion funnels. Future directions to improve the design and a possible micromachining approach to fabrication are discussed in the conclusions.

Calibration of membrane inlet mass spectrometric measurements of dissolved gases: differences in the responses of polymer and nano-composite membranes to variations in ionic strength.

This work examines the transmission behavior of aqueous dissolved methane, nitrogen, argon and carbon dioxide through two types of membranes: a polysiloxane nano-composite (PNC) membrane and a conventional polydimethylsiloxane (PDMS) membrane. Transmission properties at 30 °C were examined by membrane introduction mass spectrometry (MIMS) at nearly constant gas partial pressures in NaCl solutions over a range of ionic strength (0-1 molal). Gas flow rates were examined as a function of dissolved gas concentrations using the Setschenow equation. Although MIMS measurements with PDMS and PNC membranes produced signal responses that were directly proportional to aqueous dissolved gas concentrations, the proportionalities varied with ionic strength and were distinctly different for the two types of membranes. With the exception of carbon dioxide, the PNC membrane had membrane salting coefficients quite similar to Setschenow coefficients reported for gases in aqueous solution. In contrast, the PDMS membrane had membrane salting coefficients that were generally smaller than the corresponding Setschenow gas coefficient for each gas. Differences between Setschenow coefficients and membrane salting coefficients lead to MIMS calibrations (gas-flow vs. gas-concentration proportionalities) that vary with ionic strength. Accordingly, gas-flow vs. gas-concentration relationships for MIMS measurements with PDMS membranes are significantly dependent on ionic strength. In contrast, for PNC membranes, flow vs. concentration relationships are independent (argon, methane, nitrogen) or weakly dependent (CO2) on ionic strength. Comparisons of gas Setschenow and membrane salting coefficients can be used to quantitatively describe the dependence of membrane gas-flow on gas-concentrations and ionic strength for both PDMS and PNC membranes.

Underwater mass spectrometers for in situ chemical analysis of the hydrosphere.

Underwater mass spectrometry systems can be used for direct in situ detection of volatile organic compounds and dissolved gases in oceans, lakes, rivers and waste-water streams. In this work we describe the design and operation of (1) a linear quadrupole mass filter and (2) a quadrupole ion trap mass spectrometer interfaced, in each case, with a membrane introduction/fluid control system and packaged for underwater operation. These mass spectrometry systems can operate autonomously, or under user control via a wireless rf link. Detection limits for each system were determined in the laboratory using pure solutions. The quadrupole mass filter system provides detection limits in the 1-5 ppb range with an upper mass limit of 100 amu. Its power requirement is approximately 95 Watts. The ion trap system has detection limits well below 1 ppb, an upper mass limit of 650 amu and MS/MS capability. Its power consumption is on the order of 150 Watts. The present membrane limits analysis to non-polar compounds (<300 amu) with analysis cycles of 5-15 minutes. Deployments of both types of instruments are described, along with a discussion of the challenges associated with in-water mass spectrometry and descriptions of alternative in-water mass spectrometer configurations.

Identification and mapping of phosphocholine in animal tissue by static secondary ion mass spectrometry and tandem mass spectrometry.

Secondary ion mass spectra and images were obtained from animal tissue samples using less than 10(13) primary ions/cm2. The mass spectra showed abundant peaks at m/z 184 and m/z 86. Tandem mass spectrometry (MS/MS) was used to identify the source of these ions as phosphocholine. Secondary ion images obtained using MS/MS were used to show that m/z 86 is an abundant gas-phase fragment ion derived from m/z 184. These results are discussed in terms of the physiology of the samples investigated.

Massive cluster ablation as preparation for organic secondary ion imaging.

A focused Cs+ beam was used to obtain secondary ion mass spectra and images from samples of stearic acid on gold before and after ablation by a beam of massive cluster ions. Ablation appears to have two effects on secondary ion emission. First, the number and intensity of peaks reflecting contamination are substantially reduced. Secondly, the absolute intensity of secondary ion current characteristic of the analyte increases. These features simplify mass spectra and improve contrast in the images obtained.

Improved energy compensation for time-of-flight mass spectrometry.

A model for improved energy compensation in time-of-flight (TOF) mass spectrometry has been developed and tested. This model includes effects of both the acceleration and drift region on mass resolution for surface desorption TOP mass spectrometers that employ ion mirrors to improve mass resolution. Appropriate placement of an additional stage onto the conventional one- and two-stage mirrors provides compensation for flight time spreads, caused by initial ion kinetic energy distributions, in both regions. Experimental results that validate the model calculations are presented for a modified commercial two-stage ion mirror. For example, m/†m for Na(+) was improved from ∼ 100 to ∼ 200 using only a 200-eV drift energy and a 58-cm drift path.

Charge compensation for imaging large insulating samples by using secondary ion tandem mass spectrometry.

A charge compensation technique has been developed for secondary ion mass spectrometry and imaging of insulating samples as large as 1 cm(2) using a triple quadrupole-based microprobe. The microprobe secondary ion extraction field is synchronized with a periodic primary Cs(+) beam to allow a sheetlike beam of 5-eV electrons to pass over the sample surface when the extraction field is zeroed. Electrons are attracted to, and neutralize, any points on the sample that have accumulated positive charge. Positive secondary ion images from Teflon®, a well-known insulator, illustrate the effectiveness of charge compensation. Locating and identifying analytes on dry filter paper by using tandem mass spectrometry are also demonstrated.

Secondary ion emission from solutions: time dependence and surface phenomena.

The temporal behavior of FAB mass spectra from glycerol solutions of tetradecyltrimethylammonium bromide (C14H29-N(CH3)3Br, TTAB) and tetraethylammonium iodide (TEAI) was investigated. FAB spectra of the TTAB solution displayed a continuous decrease in TTA+ with time. Spectra obtained from the TEAI solution were initially invariant for several minutes and then displayed a gradual increase in the relative abundance of TEA+ to a maximum, followed by a precipitous drop in ion intensity. Secondary ion images of droplets of TTAB solution showed that emission of both TTA+ and glycerol secondary ions was homogeneous across the sample. Secondary ion images of droplets of TEAI solution showed heterogeneous and segregated emission of both TEA+ and protonated glycerol. Results from the FAB spectra and the secondary ion images were correlated and rationalized on the basis of surface tension-induced mass transport and matrix evaporation.

Organic ion imaging using tandem mass spectrometry.

A triple-quadrupole mass spectrometer has been interfaced with a wide-angle secondary ion microprobe. The combination permits acquisition of data necessary to determine the distribution of targeted organic analytes even in the presence of overwhelming isobaric interference. Micrographs generated from secondary ion intensity alone are compared to those generated using secondary ionization with tandem mass spectrometry (MS/MS), both for image reference and to show the improvement in image quality that can be attained when MS/MS is employed. Inhomogeneous mixtures of glycerol, KCl, and asparagine on 1-cm-diameter aluminum targets were used to demonstrate the instrument's selectivity. Secondary ions generated from samples of this system include isobaric 133Cs+ implanted from the primary ion beam, the 41K(+)-glycerol adduct, and protonated asparagine.

Monitor for displaying real-time images of low energy ion beams.

Analytical Chemistry Division. Oak Ridge National Laboratory. Oak Ridge, Tennessee, USA A monitor that provides real-time images of low energy (< 50 eV) ion beams has been designed, constructed, and tested. The cross-sectional image of the beam at the entrance aperture of the monitor is magnified by a factor of 6.5 and displayed on a CRT, following current amplification by using a dual microchannel plate assembly. The monitor provides unambiguous information regarding the cross section of any low energy ion beam. Anplication in the design and testing of quadrupole-based mass spectrometers is emphasized.

A wide-angle secondary ion probe for organic ion imaging.

A secondary ion source has been developed for an organic ion microprobe capable of imaging samples up to 2 em in diameter. The source uses a focused 5 keY Cs(+) ion beam which is rastered across the sample surface, and secondary ions from each point on the sample are collected and formed into a low energy beam to be analyzed by a quadrupole mass filter. Dynamic emittance matching is employed to deflect ions from off-axis points on the sample back onto the mass analyzer axis. Rastering and dynamic emittance matching are rapidly controlled by assembly language programs using an IBM/AT (80286) type computer. A low energy ion monitor was used to tune and evaluate the secondary ion source by providing a magnified cross-sectional image of the ion beam at the source exit aperture. A well-focused and centered secondary ion beam was obtained from each point on the sample, indicating that large-scale dynamic emittance matching with high collection efficiency is possible. Mass resolved images of grids and glycerol samples are shown to demonstrate the performance of the integrated secondary ion source mass analyzer and control system.